![]() * Delete the sp flash tool folder then re-extract Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using * Probably have the wrong driver installed. * Ensure you tick the boxes for only the files present in the ROM you're about to flash * Ensure that the file(s) you're trying to flash are actually for your exact phone model Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) Enable DRAM fail * If that doesn't work, open the scatter file using Notepad++ and change _NODL_FAT to FAT by removing "_NODL_". * If that isn't feasible, try formatting first or use firmware upgrade * If the MTK backup contains more than one scatter file, retry flashing with the other scatter file. * If Download doesnt work then do a firmware upgrade * Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility Message: Error 8038! Android download pmt is ready and layout has been changed If you're certain it wasn't, try a higher version of SP Flash tool * Ensure the scatter file wasn't renamed. Meaning: SP Flash tool doesn't accept the name format of your scatter file Please check the scatter file name you load is legal Message: Error: Initialize scatter file failed. If you're sure they are, then try formatting before flashing again Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) * Follow this guide to manually install vcom drivers Meaning: Necessary drivers have not been successfully installed on the PC and click Yes if you get an Update Driver warning * Proceed with the Mediatek (VCOM) driver installation steps described at * Select Let me pick from a list of device drivers on my computer * Select Browse my computer for driver software * Right-click whatever the phone is detect as and select Update Driver Software. * Take note of what the phone is detected as (often as Unknown or Mediatek under Other devices) * Connect the phone to the PC via a USB cord, Device manager should refresh * Launch Device manager (Right-click My Computer > Select Manage) * Try holding down the Volume decrease (you could try volume increase or both) while connecting the phone to PC for flashing * Try a different USB cord, USB port & PC Message: The phone makes the disconnecting sound just as flashing begins, interrupting the process Phone automatically disconnecting during flashing * Solution: The ROM / Firmware you flashed is incompatible, get from another source (especially boot.img, logo.bin and uboot.bin / lk.bin ) Message: You can see the phone responding to buttons and making sound but all is blurred by white screen Phone shows white screen, strange colors or divided screen after flashing * Try a firmware / ROM from another source use MTK droid tools version 2.3.0 to backup usrdata & cache or copy then from the clockworkmod backup * Remove the battery for 30 seconds then slot back in * Boot the phone into recovery mode then wipe data / factory reset * Give up to 5 minutes because first boot takes time ![]() * Ensure there's a formatted SD card in the phone before flashing Message: Phone still stuck at Bootlogo or Bootloop Message: Phone no longer responds to power button We'll keep adding to the list so keep checking, and feel free to contribute.įor those who don't know how to use Sp flash tool, please read before you proceed. ![]() ![]() Here's a list of SP Flash tool errors, what they mean and how to fix / resolve them.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |